Products
? 中心加強件：磷化鋼絲，可能會(huì )根據結構設計外護一層PE。
? 松套管：以PBT為原材料，松套管內含12芯（或以下）光纖、內部填充阻水纖膏。
? 填充繩：PP材質，用于填充纜芯結構（有需要時）。
? 絞合方式：松套管和填充繩以SZ形式絞合于中心加強件上。
? 阻水方式：纜膏填充于纜芯，油膏式阻水（半干式阻水可選）。
? 保護層：鋁帶縱包鎧裝。
? 加強鎧裝層：鍍鋅細圓鋼絲繞包鎧裝。
? 撕裂繩：2根聚酯撕裂繩在每層護套內。
? 內護套：黑色MDPE。
? 外護套：黑色HDPE。
? Central Strength Member (CSM): Steel wire, with PE sheath covering when needed.
? Loose Tube: PBT plastic material, containing 12 fibers and filled with a suitable water tightness jelly.
? Filler Elements: PP plastic rods, when needed.
? Stranding: Loose tube & filler SZ stranded around CSM.
? Longitudinal Water Tightness: Wet core with water swellable elements (Dry core is optional).
? Aluminum Tape: Aluminum-Plastic tape as protection layer.
? Steel Wire Protection: Galvanized steel wire armor provide additional protection.
? Ripcord: 2 polyester ripcords under each sheath.
? Inner Sheath: Black MDPE.
? Outer Sheath: Black HDPE.
重要 Important
由于直埋光纜的特殊性質，不同芯數、結構會(huì )導致產品規格不同。如下48芯設計僅針對雙層護套、鋼絲繞包鎧裝直埋光纜。
如有其它結構要求，請與我們聯系，會(huì )協助提供符合您要求的設計。
Due to the particularity of direct burial cable, different core and structure will lead to different designs. The following 48-core design is only for double sheath, steel wire armor direct burial cable.
If you have any other requirements, please contact us and we will provide the design that meets your requirements.
產品規格
|
產品描述 |
||
|
條目 |
單位 |
GYTA33-48 |
|
光纜總芯數 |
48 |
|
|
松套管數量 |
4 |
|
|
每套管內所含纖芯數 |
12 |
|
|
填充繩數量 |
1 |
|
|
松套管/填充繩直徑- Φ |
mm |
2.2 |
|
中心加強件直徑 （可能含加護墊層） Φ |
mm |
1.8 |
|
內護套厚度 |
mm |
≥0.8 |
|
外護套厚度 |
mm |
≥2.0 |
|
平均光纜外徑 |
mm |
17.5 ±0.5 |
|
拉力值 (可定制化，小值) |
N |
2500 |
|
其他性能滿足YDT 901 和 IEC 60794-1所要求的測試方法 |
||
Cable Specification
|
Cable description |
||
|
Item |
Specified |
Measure |
|
Cable Cores |
48 |
|
|
No. of Tubes |
4 |
|
|
Fiber Counts in Tube |
12 |
|
|
No. of Fillers |
1 |
|
|
Tube/Filler- Φ |
mm |
2.2 |
|
CSM (Coated CE when needed)- Φ |
mm |
1.8 |
|
Thickness of Inner Sheath |
mm |
≥0.8 |
|
Thickness of Outer Sheath |
mm |
≥2.0 |
|
Nom. Cable Diameter |
mm |
17.5 ±0.5 |
|
Tensile Force (Customizable, minimum) |
N |
2500 |
|
Other performance conforms to the standard by YDT 901 and IEC 60794-1 |
||
光纖以及松套管色序
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
Color code for fiber and loose tube
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
光纖性能指標
|
項目 |
指標 |
|
|
衰減 |
@1310nm |
≤0.35 dB/km |
|
@1550nm |
≤0.24 dB/km |
|
|
模場直徑 (MFD) |
@1310nm |
9.2±0.4 μm |
|
色散系數 |
1288~1339nm ([敏感詞]) |
≤3.5 ps/(nm·km) |
|
@1550 nm |
≤18 ps/(nm·km) |
|
|
零色散波長 |
1300nm~1324 nm |
|
|
零色散斜率 |
≤0.092 ps/(nm2·km) |
|
|
截止波長 λcc (nm) |
≤1260 nm |
|
|
偏振膜色散 (PMD, 光纖原始狀態) |
≤0.20 ps/km1/2 |
|
|
包層直徑 |
125±1 μm |
|
|
涂層直徑 |
245±10 μm |
|
|
包層不圓度 |
≤1.0% |
|
|
芯/包同心度誤差 |
≤0.6 μm |
|
|
光纖的抗拉強度 |
≥0.69 GPa (100kpsi) |
|
Fiber performance
|
G.652D performance (Cabled) |
||
|
Characteristics |
Acceptance Value |
|
|
Attenuation |
@1310nm |
≤0.35 dB/km |
|
@1550nm |
≤0.24 dB/km |
|
|
Mode field diameter (MFD) |
@1310nm |
9.2±0.4 μm |
|
Chromatic dispersion coefficient |
1288~1339nm (absolute value) |
≤3.5 ps/(nm·km) |
|
@1550 nm |
≤18 ps/(nm·km) |
|
|
Zero-dispersion wavelength |
1300nm~1324 nm |
|
|
Zero-dispersion slope |
≤0.092 ps/(nm2·km) |
|
|
Macrobend loos at radius=30mm, in 100 turns. |
≤0.1 dB |
|
|
Cable cut-off wavelength λcc (nm) |
≤1260 nm |
|
|
Polarization mode dispersion (PMD, for fiber on the reel) |
≤0.20 ps/km1/2 |
|
|
Cladding diameter |
125±1 μm |
|
|
Coating diameter |
245±10 μm |
|
|
Cladding non-circularity |
≤1.0% |
|
|
Core/cladding concentricity error |
≤0.6 μm |
|
|
Proof test |
≥0.69 GPa (100kpsi) |
|